The current trend in bathroom lighting is to set up larger, sunnier bathrooms with artificial lighting. A single, small lamp from the middle of the ceiling is not enough by today’s standards. Alternative sources of general lighting include recessed ceiling lights or indirect lighting placed on the ceiling or walls. In addition to good general lighting, appropriate task lights are a must.
Modern bathroom lighting
How bathroom lighting is selected and placed depends on the size and layout of your bathroom. It also depends on the color scheme of the room – the light colors reflect and enhance the lighting effects, while dark colors absorb and subdue the light.
Luxury in bathroom lighting
The lighting of a mirror
Small or large, a bathroom typically acts as a care center. For this reason, the area in front of the mirror should be evenly lit and free from shadows.
Insight into the bathroom lighting
When planning a lighting design for your bathroom, follow these guidelines to ensure adequate bathroom lighting.
The light sources must be placed in such a way that the light emanates from above and below on both sides of the mirror. This technique, called cross-lighting, effectively eliminates all shadows. If you only have the light from above, it hits the eyebrows, creating shadows under the eyes, which is not an encouraging sight every morning.
When fluorescent tubes are selected to illuminate a mirror, the light coming from the standard fluorescent tubes is cold and therefore acceptable for an office or shop lighting, but not for makeup use. Use a 24-inch, 20-watt tube on each side of the mirror and mount two 24-inch, 20-watt tubes above the mirror or a 32-watt circle tube to the ceiling and then you have an adequate one Lighting to this room.
When fixtures are selected, appropriate lightbulbs are the only option to allow pendant lights to be placed on either side of the mirror. Such lights must each contain two 60-watt or 75-watt light bulbs. If the ceiling light is round, it must be at least 12 inches in diameter and contain a lightbulb or light bulb totaling 100 to 120 watts.
Larger mirrors that are 36 inches or more in width may require a different approach. If standard guidelines are followed, the center of the mirror can appear a bit dark. To avoid this, it is necessary to choose more powerful headlights that ensure complete coverage across the width of the mirror. Another effective option is to have a double row of recessed ceiling lights above the mirror.
Additionally, small powder rooms usually need enough light above the mirror and a ceiling light directed towards the front edge of the mirror.
Bathroom lighting for modern design
Lighting for bathtubs and showers
In a closed shower or bathtub area, closed, vapor-tight lights are preferred. Be careful when positioning these if you don’t want direct light when in the bathtub. A lamp with infrared radiation, which is mounted just outside the bathtub or shower, helps to prevent the water from cooling down quickly. All switches must be at least 6 meters from the tub and shower.
The right light
Most experts recommend using such light bulbs in the bathroom that mimic natural light. But incandescent lamps also produce a lot of heat, which is often undesirable. Compact fluorescent lamps are a good alternative to this. They require much less power per lumen (a measurement of light intensity) and the tubes offer a warm, appealing color spectrum.
The fluorescent lamps usually work without a dimmer. This allows you to adjust the light according to your needs and moods. Dimmers make nighttime visits to the toilet more bearable because the light can be turned down. Be sure to install a switch in front of each door so that no one crosses the bathroom in the dark.
To get a better idea of the modern trends in bathroom lighting, take a look at the following photos: